14
en | Installing
4
Installing
4.1
Mounting the device on a mounting rail
The controller can be attached on a standard 35 mm (1.377 in.) mounting rail using a snap-in
mechanism. Attach the controller into the upper edge of the mounting rail [1], then push
down the device and snap it onto the rail by pushing it towards the back [2].
1
Figure 4.1: Mounting the controller on a mounting rail
For information on how to install the device in an enclosure, refer to the separate instruction
manual of the enclosure AEC-AMC2-UL01 or AEC-AMC2-UL02. After installing the device, keep
the door of the enclosure closed.
2022-11 | V05 |
2
Руководство по установке
Access Modular Controller 2
Bosch Security Systems B.V.