Installing The Kit Software; Before You Start; Install Fx3 Sdk; Install Pleora Ebus Player - Infineon DEMO FX3 U3V CAM01 EZ-USB FX3 Manual

DEMO_FX3_U3V_CAM01 EZ-USB™ FX3 camera kit guide

Installing the kit software

2 Installing the kit software
This chapter describes the procedure to install software for the DEMO_FX3_U3V_CAM01 solution demo kit.
2.1

Before you start

The installation of the FX3 SDK and other Infineon software may require administrator privileges. However,
privileges are not required to run the software once it is installed.
2.2

Install FX3 SDK

Download and install EZ-USB™ FX3 software development kit
templates on the CY-RB4111 kit.
Installable packages are available for Windows, Linux, and macOS.
After the installation is complete, the contents are available at <Install Directory>\ EZ-USB FX3 SDK.
Note:
The default <Install Directory> is C:\Program Files(x86)\Cypress.
1.
See GettingStartedWithFX3SDK.pdf available in the installation directory for more details.
2.
2.3

Install Pleora eBUS Player

Download and install Pleora eBUS Player from the following links:
• For Windows 64-bit
•
For Windows 32-bit
User Guide
to configure and evaluate the example
6 of 28 002-36189 Rev.*B
2022-12-13