Advertisement
Quick Links
Quick start guide
EZ-USB™ FX3 camera kit
DEMO_FX3_U3V_CAM01
The DEMO_FX3_U3V_CAM01 EZ-USB™ FX3 camera kit demonstrates streaming of
USB3 Vision (U3V) videos up to 1080p @30fps in YUV format to a host equipped with
USB 3.1 Gen1 capability.
The kit consists of two boards: a baseboard with the EZ-USB
camera add-on board (with the camera module and dual microphones) connected
to the baseboard.
www.infineon.com/FX3
FX3 controller, and a
™
Advertisement
Related Manuals for Infineon EZ-USB FX3
Summary of Contents for Infineon EZ-USB FX3
- Page 1 USB3 Vision (U3V) videos up to 1080p @30fps in YUV format to a host equipped with USB 3.1 Gen1 capability. The kit consists of two boards: a baseboard with the EZ-USB FX3 controller, and a ™ camera add-on board (with the camera module and dual microphones) connected to the baseboard. www.infineon.com/FX3...
- Page 2 Quick start guide Before you start 1. Ensure that you have a PC with the following: › Windows 10 with USB 3.1 Gen 1 › 1.0 GHz or higher CPU clock 2. Download and install Pleora eBUS Player: › https://tinyurl.com/Window64Bit ›...
- Page 3 Quick start guide Step 1: Hardware setup 1. Connect the kit to the PC using the Super Speed USB-C cable provided with the kit. Observe that the Power ON LED (LED1) glows green. Step 2: Select USB3 Vision device in eBUS Player Selecting USB3 Vision device in eBUS 1.
- Page 4 Interface for MIPI (J1) camera module from Raspberry Pi (J3) GPIO/interface connector 2 (J4) See the kit guide available at the kit website for details. Document number: 002-36690 Rev. ** Date: 11 / 2022 All rights reserved. © 2022 Infineon Technologies AG...