Troubleshooting; Programming Test; Video Streaming Test - Infineon DEMO FX3 U3V CAM01 EZ-USB FX3 Manual

DEMO_FX3_U3V_CAM01 EZ-USB™ FX3 camera kit guide

Troubleshooting

6 Troubleshooting
6.1

Programming test

6.1.1 No bootloader device detected
If "No Bootloader Device Detected" message appears during programming, verify that the PMODE switch (SW3)
is in the "USB" state.
Figure 23 Mode switch setting to USB mode
6.2

Video streaming test

6.2.1 FX3 not displayed in the eBUS Player
Verify that the PMODE switch (SW3) is in the SPI position.
Figure 24 Mode switch setting to SPI mode
User Guide 23 of 28 002-36189 Rev.*B
2022-12-13