Battery management
1. Press
2. Select Hub.
3. Select Battery.
Detailed information about the battery appears.
4. You can return to the main menu by selecting repeatedly
You can close the menu by swiping down on screen or by pressing
Checking the status of a sensor battery
The sensor battery status indicators are always displayed in detailed views under the
measurement labels. In LIVE view the indicators are displayed if the battery charge
is getting low. If you need to see more technical details, you can do it by entering
the Hub menu.
1. Press
2. Select SpO2 or RR according to which sensor battery you need to check.
3. Select Battery.
Detailed information about the battery appears.
4. You can return to the main menu by selecting repeatedly
You can close the menu by swiping down on screen or by pressing
Changing a sensor battery
NOTE
When you see indications about the sensor battery charge getting low, change the
battery.
Note that if you change the battery while monitoring is ongoing, the waveforms and
values are lost.
1. Disconnect the current battery from the sensor.
2. Take a new, fully charged battery from the charger and connect it to the sensor.
78
.
.
Always check that you have additional charged sensor
batteries ready to be taken into use in case the current battery
discharges completely during monitoring. Loss of power will
result in loss of monitoring.
Portrait
™
Mobile Monitoring Solution
on top of the screen.
.
on top of the screen.
.
5815148-01