Powering On The Hub; Unlocking The Hub Screen - GE Portrait Hub01 User Manual

3. Select Save to save the edited patient demographics, or select Cancel to cancel
editing and return to the previous screen (the window closes and no changes
are saved).
If patient demographics are successfully saved, the Single Patient View for the
patient is displayed with the edited demographic information. All other aspects of
the patient, such as assignment to a Hub, remain unchanged. If required fields
were omitted, or fields contain invalid inputs, an error message appears.

Powering on the Hub

The Hub is powered on with the power key (1.) located on the side of the Hub:
1. Press the power key (short press <1.5 s).
You can feel a short vibration of the Hub when it is powered on. If the Hub is not
powered on when you press the key, place it into the charger.

Unlocking the Hub screen

If the Hub screen is locked, you need to enter the passcode to unlock it. The passcode
is configured in the Config UI and it is the same for all Hubs in the same care area. For
more information on the configuration, refer to the service manual.
1. Enter your passcode with the on-screen keypad.
As you select the numbers, each selected number is displayed as a small ellipse
above the keypad. The confirm key
5815148-01
is also activated (it turns gray):
Portrait ™ Mobile Monitoring Solution
Managing patients and monitoring
65