Battery management
Safety precautions
Familiarize yourself with the safety chapter of this manual for all safety precautions
related to the system. Some warnings or cautions may also be listed with detailed
instructions in this chapter.
Connecting and disconnecting sensor batteries
1. To connect a battery, push it into the sensor:
Respiration sensor:
1 = sensor battery
2 = sensor
3 = respiration patch connector
2. To disconnect a battery, pull it off the sensor.
3. Place the battery into the appropriate slot in the charger if not in use.
LED indicators on sensor batteries
There are three LED indicators on each sensor battery:
5815148-01
Portrait
™
Mobile Monitoring Solution
SpO
sensor:
2
1 = sensor battery
2 = sensor
8
73