1. Press the key for 1.5 seconds.
If the screen was active with a measurement and passcode accepted, a text
●
appears asking you if you want to end patient monitoring, remove patient data
from the Hub, and shut down. Confirm shut down.
If the screen was off, the locked screen appears. To proceed with the shut
●
down procedure, enter the passcode and when the screen is active, press the
key again and then confirm the shut down.
The text Shutting down... appears. The screen goes blank once the Hub is shut down.
If you want the Hub to be off while in the charger, place it into the charger while the
shut down is still ongoing. Otherwise the Hub will turn on as you place it into the
charger.
Discharging a patient
Discharging a patient on the Central Viewer removes the patient from continuous
monitoring and deletes patient information and measurement data. After discharging
the patient that patient slot is free for a new monitoring session.
1. Select Discharge Patient from the Single Patient View action menu.
The Discharge Patient? form appears.
2. Select Yes, Discharge to discharge the patient, or select Cancel to return to the
previous screen without discharging the patient.
After selecting Yes, Discharge all patient monitoring data is immediately removed.
Any paired sensors are also removed. The Multiple Patient View appears, with the
patient slot available for new patient admission.
5815148-01
Portrait
™
Mobile Monitoring Solution
Managing patients and monitoring
71