Panasonic MINAS-A5BL Series Manual page 49

• The positional command is detected based on the command after the positional command filter. For positional command
filter, refer to 4-2-3 Positional command filtering function.
Note: If Pr9.20 "Pole detection method" = 2 (Pole position estimation) and bit7 = 1 for Pr6.10 "Function
the positioning complete signals 1 (INP1) and 2 (INP2) are turned OFF forcibly until the pole position estimation
is finished.
R1.00
No. SX-DSV02829 -
expansion
Motor Business Unit, Panasonic Corporation
43-
setup",