Panasonic MINAS-A5BL Series Manual page 33

The following figure shows the state flow of 7-segment LED.
Display of station alias
Normal display (when Pr 7.00 [LED display] is 0.)
Main power is
ON and ESM
state is more
than PreOP.
Servo-ON
Left dots OFF
Alarm occurred
Alarm display
Alternately blinks main and sub (with a dot at the left) of
the alarm code in decimal number.
(e.g. overload)
Main code
R1.00
Control power ON
Main power is
OFF or ESM
state is Init.
Pole position
Servo-OFF
was estimated
(CS-CMP=ON)
Alarm cleared
Sub code
(with left dot)
All off
All on
[ n A ]
(approx. 0.6 s)
Setup of RSW(e.g. MSD = 0, LSD = 3)
(Pn.7.01 The time specified by "Address display time
after powering-on setting")
Main power is
ON and ESM
state is more
than PreOP.
Servo-ON
Warning occurred
Warning display
Displays warning code (hexadecimal) and normal display
alternately at a slow rate. Right dot blinks when warning
code (Example of overload in servo-ON state) is
displayed.
Warning code (approx. 2 s)
Right dot blinks.
Motor Business Unit, Panasonic Corporation
No. SX-DSV02829 -
Main power is
OFF or ESM
state is Init.
Servo-OFF
Left dots ON
Latched: remove the cause and
clear alarm
Unlatched: remove the cause
Normal display
(approx. 4 s)
27-