Removing The Cylinder Head - APRILIA SCARABEO 125 Service Manual

SCARABEO 125 - 200
•
Remove both camshafts.
See also
Removing the timing system drive

Removing the cylinder head

•
Remove the camshafts.
•
Undo and remove the two side screws
(1).
•
Loosen the screws (2- 3) operating di-
agonally.
•
Undo and remove both central short
screws (2) and collect the washers.
•
Undo and remove both central long
screws (3) and collect the washers.
•
Remove the head.
•
Collect the lower chain slider.
See also
Removing the cam shaft
Engine
ENG - 97