SCARABEO 125 - 200
Measure the distance between the outer rotor and
the pump body.
Characteristic
limit clearance allowed:
0.18 mm
Check the rotor axial clearance using a trued bar
as reference plane, as shown in the figure.
Characteristic
Limit value allowed:
0.09 mm
See also
Removal
Refitting
•
Preassemble the entire oil unit, the
chain (observing the direction of rota-
tion marked when fitting) and the
crankshaft driving gear.
•
Insert the oil pump spindle in its posi-
tion and fit the oil pump in its housing.
•
Tighten the two screws with Loctite
243.
Locking torques (N*m)
Oil pump housing EI fixing screws - M6x25 (2)
10 Nm (7.38 lbf ft) - Loctite 243
Engine
ENG - 125