Engine
YELLOW TYPE: 2.015 - 2.020
NOTE
DO NOT TAKE THE MEASUREMENT ON THE TWO HALF-SHELLS COUPLING SURFACE SINCE
THE ENDS ARE RELIEVED TO ALLOW BENDING DURING THE DRIVING OPERATION.
Characteristic
Ideal lubrication pressure
4 atm
Driving depth
0.5 +/-0.1 mm from internal stop
Refitting the crankshaft
•
Using the suitable special tool, fit the
main bushings.
•
Fit the new oil seal using a commer-
cially available punch.
Specific tooling
020701Y Punch for bushings
•
Fit the crankshaft operating from the
variator side.
Refitting the crankcase halves
•
Fit the crankshaft.
ENG - 120
SCARABEO 125 - 200