SCARABEO 125 - 200
•
Undo and remove the three screws fix-
ing the stator and remove it together
with the wiring.
See also
Removing the hub cover
Refitting the stator
•
Install the stator following the removal
steps but in reverse order.
•
Place the pick-up cable as indicated.
•
Refit the stator and the flywheel carry-
ing out the removal steps but in reverse
order; tighten the retainers to the speci-
fied torque.
Locking torques (N*m)
Stator EI fixing screws - M6x25 (3)
ft) - Loctite 243
See also
Removing the hub cover
10 Nm (7.38 lbf
Engine
ENG - 89