ENGINE
3.3.
CYLINDER HEAD
3.3.1.
REMOVING THE CYLINDER HEAD
•
Using the suitable special tool (no. 8140850), loosen
and remove the flywheel cover giving access to the
crankshaft.
•
Using the suitable special tool (no. 8140850), loosen
and remove the flywheel cover giving access to the
timing reference.
•
Turn the crankshaft counter clockwise so to bring the
piston to top dead centre in the combustion stage.
•
This position is reached when flywheel reference mark
"I" matches flywheel cover mark.
3 - 22
MY 660