Position The Headset; Replace The Pre-Installed Earbud And Earhook - Bell 8084150 User Manual

Position the headset

There are four earbuds and four earhooks provided.
One earbud and one earhook have been attached to
the headset.
You can choose a suitable size of earbud, earhook
and an appropriate way to position your headset.
Replace the pre-installed earbud and
earhook
1. Hold both sides of the earbud. Twist and pull
the earbud until it separates from the earpiece.
2. Rotate the earhook to the vertical position
then pull the earhook until it separates from
the headset.
3. Attach an earhook and a suitable earbud to the
headset until they fit into place.
To wear on the right ear:
To wear on the left ear:
4. Wrap the earhook with the sponge.
10 10