Answer A Cell Call; End A Cell Call; Answer A Cell Call While On A Home Call; Answer A Home Call While On A Cell Call - Bell 8084150 User Manual

Dect 6.0 cordless telephone with bluetooth® wireless technology
Table of Contents

Advertisement

While entering numbers press DELETE or CANCEL to
make corrections, press and hold PAUSE to insert a
dialing pause (a p will appear)

Answer a cell call

Press
/CELL,
, or any dialing key (0-9,
) to answer.
NOTE
• You can also use your cell phone to answer the call. If
you answer with your cell phone, it will disconnect from
the telephone base.

End a cell call

Press OFF on the handset, place the handset in the
telephone base or handset charger.

Answer a cell call while on a home call

While you are on a home call and you receive an
incoming cell call, you will hear a beep, and your
handset will flash
. The telephone base and all
other handsets will ring.
To answer the incoming cell call
Press
/CELL on the handset. The home line
is put on hold.
To resume the home call on hold
/HOME on the handset.
Press

Answer a home call while on a cell call

While you are on a cell call and you receive an
incoming home call, you will hear a beep and your
handset will flash
. The telephone base and all
other handsets will ring.
To answer the incoming home call:
/HOME on the handset. The cell line is put
Press
on hold.
To resume the cell call on hold:
Press
/CELL on the handset.

Speakerphone

When the handset is on a call, press
between the speakerphone and the handset
earpiece. When the speakerphone is active, the
handset will display Speaker.
or

Volume

During a call, press
on the handset, or VOL+ or VOL- on the headset to
adjust the listening volume.
If this is a cell call and the volume is too loud or
quiet, try changing the volume on your cell phone.
On some cell phones, changing the volume on
the cell phone affects your cell call volume on the
8084150 handset.
NOTES:
The handset and speakerphone volume settings
are independent
When the volume reaches the minimum or maximum
setting, you will hear two beeps

Mute

The mute function allows you to hear the other party
but the other party cannot hear you.
During a call press MUTE. The handset will
display Muted until the mute function is
turned OFF
Press MUTE again to resume the conversation.
The handset briefly will display Microphone on
-OR-
During a call, press MUTE on the headset. The
headset announced "Mute on"
Press MUTE again to resume the conversation.
The headset announced "Mute off "
23
23
to switch
/VOLUME or VOLUME/

Advertisement

Table of Contents
loading

Table of Contents