Telephone Base Lights Overview; Handset Lights Overview; Alert Tones Overview - Bell 8084150 User Manual

Telephone base lights overview

IN USE
1/ 2
CELL CELL
/ANS ON/OFF

Handset lights overview

CHARGE
• ON when the telephone line
is in use
• ON when you are
registering a handset
• Will flash quickly when
there is an incoming call
• Will flash when another
telephone sharing the same
line is in use
• Will flash when you are
deregistering all handsets
• ON when a Bluetooth
device is connected to
the base
• Will flash when the
telephone base is in
discoverable mode
• ON when the answering
system is turned on
• ON when the handset
speakerphone is in use
• ON when the handset is
charging in the telephone
base or handset charger
Headset lights and alert tones overview
Light status
Red
Blue
®
Red and blue
Off
Alert tones
One short
beep every 30
seconds
Two low beeps
Three rising
beeps
6 6
• ON when the headset battery
is charging
• Will flash every 10 seconds when
the headset battery is low and
needs charging
• Will flash twice every three
seconds when the headset is in use
• Will flash every four seconds when
there is an incoming call
• Will flash every 10 seconds when
the headset is out of the headset
charger and has enough charge
• Will flash slowly when the headset
is not registered
• Will flash quickly when the headset
is registering to a telephone base
• No battery is installed or the
headset has run out of battery
• The headset is powered OFF
• The microphone is muted
• Call waiting alert tone
• A conference call has started