Table of Contents
Advertisement
Join a call in progress
Another handset can join you on a home call. That
call will continue until all parties hang up. You can
share an outside call with up to two handsets at the
same time.
•
When a handset is already on a call, press
HOME or
on another handset to join the call
Press OFF or place the handset in the telephone
•
base or handset charger to exit the call. The
call will continue on the other handset until both
handsets hang up
NOTE:
•
If you have paired a DECT 6.0 cordless headset and
speakerphone to the telephone base, you can also
join a call in progress using the paired device. Refer to
the user's manuals of the respective product for more
information.
Call waiting on the home line
When you subscribe to call waiting service with your
telephone service provider, the handset will flash
and you will hear a beep if you receive a second
incoming home call.
Press FLASH on the handset to put your current
•
call on hold and take the
new call
Press FLASH on the handset at any time to
•
switch back and forth
between calls
Call waiting on the cell line
When you subscribe to call waiting service with your
cell phone service provider, the handset will flash
and you will hear a beep if you receive a second
incoming cell call.
•
Press
/CELL on the handset to put your
current call on hold and take the
new call
/CELL on the handset at any time to
•
Press
switch back and forth between calls
Chain dialing
Use this feature to initiate a dialing sequence from
numbers stored in the phonebook, Caller ID log or
redial list while you are on a call.
Chain dialing can be useful if you wish to access
/
other numbers (such as bank account numbers or
access codes)
from the phonebook, Caller ID log or redial list.
To access a number from the phonebook
while on a call:
1. Press MENU.
2. Press SELECT to select Phonebook.
3. Press
or
4. Press SELECT to dial the displayed number.
To access a number from the Caller ID log
while on a call:
1. Press MENU.
2. Press
or
SELECT.
3. Press
or
4. Press SELECT to dial the displayed number.
To access a number from the redial list
while on a call:
1. Press REDIAL to enter the redial list.
2. Press
,
the desired entry.
3. Press SELECT to dial the displayed number.
Find handset
This feature helps you find misplaced handsets.
To start paging:
Press FIND HANDSET on the telephone base.
•
All idle handsets ring and their screens display
** Paging **
To end paging:
/HOME,
•
Press
any dialing key (0-9,
-OR-
24
24
to scroll to the desired entry.
to choose Caller ID log, then press
to scroll to the desired entry.
or REDIAL repeatedly to browse to
/CELL, CANCEL,
or
) on a handset
,or
Advertisement
Table of Contents
