Headset And Data Jack; The Data Jack; The Headset Jack; Belt-Clip - Bell Sonecor BE-3850 Installation And Operating Manual

HEADSET AND DATA JACK

Data Jack

The Headset Jack

The headset jack is located on the side of the
handset and is a standard 2.5mm plug. Simply
plug the headset into the jack and the headset
will be active.
Note: When the headset is plugged into the
telephone, the microphone and earpiece
on the handset are not active.

Belt-clip

Belt-Clip
Be sure to remove the belt-clip filler cap prior to installing the
belt-clip. Install the belt-clip as shown.
To remove the belt-clip, squeeze the release at the top of the
clip where it attaches to the phone, and gently pull the clip up
and out of the handset.

The Data Jack

The jack located on the side of the
telephone labeled "DATA" is a
convenience jack. It is useful for
connecting a fax machine or modem when
there is no telephone jack available for
that device.
Headset Jack
17

BASIC DISPLAYS

Handset Idle (after time is set)
Line Ringing
Off-hook
Call Timer
New CID Received
Message Waiting
Extension In Use
18