Table of Contents
Advertisement
CONNECTING THE HEADSET
For hands free conversation, a headset (not included) is connected to the headset jack as
shown in Figure 7. The handset receiver and microphone are disabled when the headset is
connected.
Press the TALK button to answer or place a call using the headset. Refer to the manufacturer's
headset manual for more details.
You can purchase a suitable headset through service center or retailer shop.
For servicing or replacement, please contact us for suitable headset
POWER INSTALLATION
BASE UNIT POWER CONNECTION
CAUTION:
You must use a Class 2 Power Source 9VDC 700mA. The plug must correctly fit the base
unit's adapter jack.
1. Plug the adapter into a standard AC outlet.
2. Insert the small plug into the adapter jack on the bottom of the base as shown in Figure 8.
9VDC
Adapter
Jack
HANDSET BATTERY INSTALLATION
CAUTION:
Use only the Nickel Metal Hydride (Ni-MH) battery type included with this unit. Use of other
battery types may cause injuries or damage. Ensure to insert the correct battery polarity as
shown on the battery compartment during the battery installation.
1. Remove the battery compartment cover of the handset by pressing the top of the cover
and sliding it down.
2. Connect the rechargeable Ni-MH battery as shown on Figure 9.
Handset
Battery
Compartment
RED WIRE
3. Insert the Ni-MH battery into the battery compartment of the handset.
4. Slide the battery compartment cover firmly in its closed position.
Headset
Jack
Line Cord
Headset Plug
(2.5mm)
(Figure 7)
AC Wall
Outlet
9VDC
Adapter
(Figure 8)
Insert the End
of the Battery
Pack Wire
(Figure 9)
BLACK WIRE
10
Advertisement
Table of Contents
