Call Screening; Call Intercept; Record, Play And Delete Memos - Bell 8084150 User Manual

6. Press SELECT to save and you will hear a
confirmation tone.

Call screening

To screen a call at the telephone base
If the answering system and call screening are
turned ON, the announcement and the incoming
message will be broadcast at the telephone base
while the call is answered by the answering system.
Options while a message is being recorded
• Press -/VOL/+ to adjust the call
screening volume
Press -/VOL/+ to temporarily turn ON the call
•
screening if the call screening is set to OFF
• Press /PLAY/STOP to temporarily turn call
screening ON or OFF
To screen a call at a handset
If the answering system is ON, a call is answered by
the answering system and the handset will display
To screen call press [SELECT]. Press SELECT
to screen the call on your handset. The handset will
show the caller's information. If you do not subscribe
to Caller ID service, the handset will
show Screening...
Options while a message is being recorded
/VOLUME or VOLUME/
• Press
call screening volume
• Press to switch between speakerphone
mode and handset mode

Call intercept

If you want to talk to the caller whose message
is being recorded, press
/HOME or
on the handset.
Record, play, and delete memos
Memos are your own recorded messages used as
reminders for yourself or others using the same
answering system. You can record your own memos
using a system handset. Each message can be up
to 3 minutes in length. Play and delete them in the
same way as incoming messages
(see Message playback).
1. Press MENU when the handset is not in use.
2. Press
press SELECT.
3. Press
press SELECT.
4. The system will announce, "Record after the
tone. Press 5 when you are done." After the
tone, speak towards the microphone.
5. Press 5 to stop recording. The system will
announce, "Recorded."
NOTE:
• The system will announce "Memory is full" if you
record a memo when the memory is full
• Memos shorter than two seconds are not recorded
to adjust the
39 39
to scroll to Answering sys, then
or
or to scroll to Record memo, then