Table of Contents
Advertisement
SkyReach Anchor
3. After all accessible areas provided by the SkyReach Anchor in
use are covered, the connection has to be changed and the
sequence started again. The areas protected by the SkyReach
Anchors from adjacent columns will overlap, permitting workers
to support each other, and ensure a common, progressive
leading edge.
4. Connect to an adjacent SkyReach Anchor and proceed by
decking the areas reachable from that anchor, please see Figure
36. Repeat the procedure by changing to anchors placed in the
remaining columns needed to cover the whole deck.
38
Figure 35. Decking process.
Working procedure
Advertisement
Table of Contents
