Related Manuals for Honeywell SALISBURY ARC FLASH PROTECTIVE GARMENTS
Summary of Contents for Honeywell SALISBURY ARC FLASH PROTECTIVE GARMENTS
- Page 1 USER MANUAL ARC FLASH PROTECTIVE GARMENTS Gebrauchsanweisungen Manuel d’utilisation Intrucciones para el usuario...
-
Page 2: Table Of Contents
TABLE OF CONTENTS BIB OVERALLLS Intended Use of the PPE Meets: Classes of Protection NFPA 70E PPE CAT. 2 , 3 or 4 This garment meets all the requirements of ASTM F1506 Cleaning, Maintenance and Obsolescence (End of Life) ASTM F2621/F2621M Compatibility, Accessories, and Spare Parts Storage and Transport Significant Markings... -
Page 3: Intended Use Of The Ppe
It is measured in cal/cm ENVIRONMENT AND APPLICATION AND IS THE SOLE RESPONSIBILITY OF THE END USER. HONEYWELL SALISBURY IS NOT RESPONSIBLE FOR ACCIDENTS, For each application where there is a risk of an electric arc occurrence, a suitable Arc... -
Page 4: Classes Of Protection
The PPE must always be worn correctly by the user when entering a hazardous area must be unfastened and removed prior to cleaning in an ultrasonic bath or with mild as follows: Where applicable, all zippers must be fully closed and all hook and loop flaps soapy lukewarm water. - Page 5 ENVIRONMENT AND APPLICATION AND IS THE SOLE RESPONSIBILITY OF down until there is an audible click. Assure that the shield is in the final lowered THE END USER. HONEYWELL SALISBURY IS NOT RESPONSIBLE FOR position before use. ACCIDENTS, PROPERTY DAMAGE, INJURIES OR DEATH CAUSED BY USE OF INAPPROPRIATE PPE AND/OR BY IMPROPER USE OF PPE.
- Page 6 ASSEMBLY INSTRUCTIONS FOR WEIGHT BALANCING SHIELDS ASSEMBLY INSTRUCTIONS FOR WEIGHT BALANCING SHIELDS (AS1200U-PP and AS2000U-PP) (AS1200HAT-PP, AS1200-MSA-PP, AS2000HAT-PP AND AS2000-MSA-PP) Lorem ipsum...
- Page 7 ASSEMBLY INSTRUCTIONS FOR PRO-HOODS (BEKEEPER HOODS) ASSEMBLY INSTRUCTIONS FOR WEIGHT BALANCING SHIELDS (FH8RG-PP, FH12RG-PP, FH20RG-PP, FH25PO-PP, FH40RG-PP, (AS1200HAT-FB-PP and AS2000HAT-FB-PP) FH40PRG-PP, FH65PRG-PP AND FH100PRG-PP)
-
Page 8: Storage And Transport
ASSEMBLY INSTRUCTIONS FOR LIFT FRONT HOODS LFH20RG-PP, 7. SIZING LFH25PO-PP, LFH40RG-PP, LFH40PRG-PP, LFH65PRG-PP AND LFH100PRG-PP Honeywell Salisbury Arc Flash Protection Hoods are designed in universal size, i.e. one size fits to all. For selecting appropriate garment sizes, refer following wearer body size chart as per EN 13688 guidelines. - Page 9 HOW TO MEASURE COVERALL Measurements in inch (cm) Chest Measure across chest, 1” below armhole edge to edge Size Sleeve Measure from center/back neck (base of collar) out to end of cuff Small 45 (114) (92) 36 (91) 30 (76) Length Measure from high point shoulder to front bottom edge Medium...
-
Page 10: Product Part Format
8. PRODUCT PART FORMAT 10. DONNING AND DOFFING PPE Each product, coat, bib overall, coverall, overpants and hoods are assigned with First, inspect the PPE for any damages. Do not use PPE that has visible damage or was subject to an incident that could cause damage but may not result in visible damage. part numbers. - Page 11 For more information on Honeywell arc flash protection offering visit: https://sps.honeywell.com/us/en/products/safety/electrical-safety or scan QR code: Honeywell Salisbury P.O. Box 70729 North Charleston SC 29415 Phone within US: 877-406-4501 Phone outside US: 630-343-3800 Email (US/CAN): cssd@honeywell.com Email (INTL): customerservicesalisburyintl@honeywell.com Email: salisburyorders@honeywell.com...