Table of Contents
Advertisement
SkyReach Anchor
Technical data
Latex Cone (Art. 100608)
The Latex Cone is a weather protective gasket which is placed onto
the mast of the SkyReach Anchor, see Figure 15. The purpose is to
prevent water and dirt getting into the Cast-In Sleeve when the
SkyReach Anchor is in place in the sleeve, and therefore preventing
the SkyReach Anchor from becoming frozen in the sleeve. Since it
is made out of Latex it is flexible and can be pulled from the bottom
of the mast and up onto the widest section of the mast.
Make sure the Latex cone is pulled high enough so that the
Insertion Marking Label is still visible, place the SkyReach Anchor
into the Cast-in Sleeve according to the Assembly chapter. When
it is correctly installed, the gasket can be pulled down to cover the
opening of the sleeve.
Material:
Latex
Weight:
0,03 kg
Height:
125 mm
100608
Figure 15. Latex Cone
18
Advertisement
Table of Contents
