Table of Contents
Advertisement
Assembly
NOTE
Make sure that the SkyReach Anchor is inserted the correct
length by observing the Insertion Marking Label. The upper
edge of the sleeve must be aligned with the lower edge of the
label, see Figure 26 for a closer illustration of the label.
Figure 26. Close-Up on the Insertion Marking Label
2. Unpin the Lock Pin located at the lower lug of the mast, which
secures the boom and brace. Release the SkyReach Anchor
boom and brace and proceed according to Figure 27.
Figure 27. Unfolding the SkyReach Anchor
SkyReach Anchor
29
Advertisement
Table of Contents
