Table of Contents
Advertisement
SkyReach Anchor
3. Proceed either by; (1) fully assemble the SkyReach Anchor by
placing the brace hook into lower lugs at the mast according
to Figure 28, secure the brace with the Lock Pin according
to the figure. Then connect the fall arrest block to the anchor
point and make sure it is correctly secured. Or (2) proceed by
arranging the position of boom and brace according to Figure
29, connect the fall arrest block to the anchor point, as it is now
located at a lower height, before securing the brace to the mast.
NOTE
Always take care during installation; keep hands away from
hinged or folding parts to avoid injury. Keep a firm grip of
the SkyReach Anchor brace, during final unfolding, to avoid
contact / impact with the head or other parts of the body.
Figure 28. Assembling the SkyReach Anchor and attaching
30
a 6,2m Falcon Fall Arrest Block
Assembly
Advertisement
Table of Contents
