Table of Contents
Advertisement
Technical data
SkyReach Anchor
Steel Flange Clamp Kit MkII - NEW (Art. 8501)
This Steel Flange Clamp MkII - 8501 is new substitute for old
clamp 8500. Clamp is designed to be placed onto pillars with flange
width between 12 and 45 cm, see Figure 11. For the use of each
SkyReach Anchor, two pieces of the Steel Flange Clamp MkII and
one piece of the Steel Flange Clamp Cup is needed. The combined
article number for this set is 8501. After installation, the SkyReach
Anchor can be slotted into the clamps and is free to swivel. Please
see the Attachment installation chapter for information on how to
install the clamps.
Material:
Hot-dip galvanised steel
Total weight:
20 kg
Length:
0,9 m
Fits flange widths:
0,12 – 0,45 m
Figure 11. Steel Flange Clamp Kit MkII - NEW
15
Advertisement
Table of Contents
