Iridium GO! exec User Manual page 91

Admin Pin Setting Screen (when PIN is Enabled)
Software Update
The Iridium GO! exec can complete a software update via the Iridium GO! exec App.
Normally the Iridium GO! exec App will notify the user each time the App connects to an Iridium
GO! exec if there is a firmware update available. This menu provides a means of updating the
firmware if the previous requests have been denied.
NOTE: The Iridium GO! exec will reboot when the update completes, dropping all Wi-Fi
connections, voice calls and data sessions in the process.
Power off Iridium GO! exec
The Iridium GO! exec user can power off the Device using this menu.
If the device is going to be off for an extended duration (i.e. over a couple months), the device
should be powered off with storage mode enabled.
Storage mode reduces the battery drain while on the shelf and prolongs battery life.
NOTE: If the Device is put into storage mode, a charger will be required to power it on again.
91