Step 4: Connect To Iridium Go! Exec Device's Wi-Fi - Iridium GO! exec User Manual

The Iridium GO! exec will now request the Admin PIN whenever a setting or feature requires
•
the PIN. To disable the Admin PIN, navigate to the setting/admin Settings/Admin PIN menu.
The Iridium GO! exec will request the current Admin PIN before allowing the user to access the
admin settings menu. Disable the Admin pin by dragging the Enable Admin PIN slider to the
left. The new setting is automatically saved when the user leaves the screen.
Please NOTE if you forget the user PIN, refer to the Reset and Factory Reset section.

Step 4: Connect to Iridium GO! exec Device's Wi-Fi

1. Ensure your smartphone is within approximately 30 m (100 ft) Wi-Fi range of the Iridium GO!
exec device and the Wi-Fi is enabled.
2. Now, turn on the Iridium GO! exec. Navigate to settings icon
"Show Wi-Fi Credentials" option to display the QR code, SSID and password.
S
Home Screen
3. You can now connect to the device in either of the following ways:
a. Open your Iridium GO! exec mobile app on your smart device and follow on-screen instructions
to scan the QR code. Once successful the app will automatically connect to the device
Admin Pin
Show Wi-fi access
29
Admin Pin 2
on the device UI, and select
Scan QR Code