Dhcp Settings - Iridium GO! exec User Manual

DNS Caching Settings Menu

DHCP Settings

The following DHCP server settings can be configured in the Iridium GO! exec via this menu:
Local IP address. The IP address of the Iridium GO! exec on the network. The default value is
192.168.0.1
NOTE: The Gateway IP address will track the local IP address configured above.
Subnet Mask. The subnet mask defines how many bits of the host IP address are allocated to the
subnet. This would typically be 8 bits. The default value is 255.255.255.0
DHCP Range. The DHCP range defines the range of IP addresses the Iridium GO! exec DHCP
server can allocate to clients connected to the Iridium GO! exec local network.
For the settings to take effect the blue tick icon must be touched. The default range is from .50 to
.200.
87