CE (EU)
•
•
RoHS (EU)
REACH (EU)
•
License Information
Select About/License Information
The Iridium GO! exec displays any license attribution for third party software that may be used by
the Device.
Reset and Factory Reset
The Iridium GO! exec has a physical reset button located inside the SIM cover. You will need a
small paper clip or pin to press the button through the small hole.
Pressing the button for >1 second and release while the unit is powered on will force the unit to
reboot.
Pressing the button for >10 seconds while the unit is powered on will force the unit to perform a
factory reset. The unit will automatically shut down and then reboot. During rebooting it will show
the following screen to indicate it is performing the factory reset. After completing all configuration
(including Settings, Call History, ESP Configuration, Admin & Screen Lock PINs) will be deleted.
Digital Compliances
Factory reset in progress
61