Power Settings - Iridium GO! exec User Manual

Wi-Fi Setting
Settings/Admin settings/Allow Wi-Fi credentials to be displayed on Device
The device Wi-Fi credentials (SSID and password) are by default available for any user to see on
the screen when selecting "Settings" to 'Show Wi-Fi access credentials. This setting can force the
Wi-Fi credentials screen to be invisible to non-admin users, helping the admin user to only allow
approved users to access the Iridium GO! exec. The feature can be enabled/disabled by toggling
the Enable/Disable switch.
Wi-Fi Credentials 1 Wi-Fi Credentials 1

Power Settings

Select Settings/Device Power
Config/Antenna Lift
The Iridium GO! exec Power on/off can be controlled by raising/lowering the internal antenna. This
is convenient if the device is being used with an internal antenna. Simply lift the internal antenna to
power on the device, then lower the antenna to power off the Device when you have finished using
it. There is no need to separately press the power button.
NOTE: The power button can still be used to power the Device on and off regardless of the
antenna power control setting.
When the "Power on/off Based on Antenna Lift" is selected, lifting the internal antenna causes the
Iridium GO! exec to turn on (if the Iridium GO! exec is already on, nothing happens). When the
"Power on/off Based on Antenna Lift" is de-selected, the internal antenna has no bearing on the
Device power state.
52