Step 5: Configure And Set Up Sos - Iridium GO! exec User Manual

Important: Always confirm in your Smart Device Settings that you are connected to your Iridium GO! exec
Wi-Fi network prior to use of the Iridium GO! exec application

Step 5: Configure and Set Up SOS

Configuring SOS
The Iridium GO! exec offers a programmable SOS button that can be used to notify a specified
personal contact or a commercial safety service provider in the event of an emergency. You must
properly configure the SOS settings via the Iridium GO! exec application.
If not configured, the device will warn the user to configure, as SOS cannot be initiated if setup is
not completed, and you will not be able to use the SOS button.
No Service
Once configured, an SOS can be initiated either from the Iridium GO! exec by opening the SOS
cover and pressing the SOS physical button, or from the SOS icon on the User Interface (UI)
on the Iridium GO! exec and/or from the Iridium GO! exec application on smart device by pressing
the SOS icon when paired to the Iridium GO! exec.
An SOS initiated by pressing the SOS button on the Iridium GO! exec or via the SOS icon
31