Starting An Sos - Iridium GO! exec User Manual

SOS Being Configured
for IERCC as the ESP

Starting an SOS

An SOS event can be raised directly from the Iridium GO! exec App. SOS can also be
generated in 2 ways on the Iridium GO! exec device itself, from the device physical SOS
button or from the device UI. (For more information, refer to section SOS Calling).
Make sure the Iridium GO! exec App is connected to the Iridium GO! exec Wi-Fi.
Make sure you have configured an Emergency Service provider (see section SOS Settings)
Emergency mode (SOS button)
You must configure the SOS button in order to initiate an SOS call to a designated Call
Recipient. Failure to configure the SOS button will result in no call when the SOS button is
pressed. This could prevent or delay an emergency response and result in serious injury or
death.
Mode d'urgence (Bouton SOS)
Vous devez configurer le bouton SOS pour lancer un appel SOS à un Destinataire d'appel
(Call Recipient) désigné. À défaut de configurer le bouton SOS, aucun appel ne sera
transmis lorsque le bouton SOS est appuyé. Cela pourrait empêcher ou retarder toute
intervention d'urgence et entraîner des blessures graves ou la mort.
SOS being configured for not using EIRCC and
specifying a custom emergency contact number
77