Included Accessories And How To Use Them - Iridium GO! exec User Manual

a. AC Wall Charger with International Plug Kit
b. DC Car Charger
c. USB C Cable

Included Accessories and How to Use Them

AC Wall Charger:
The Iridium GO! exec comes with a 110-240v AC charger with USB-C output that allows the
device to fully charge in under 3 hours. Connecting other AC chargers to the USB-C charging port
may also work, but if the charger is lower power it will take longer to charge. The Iridium GO! exec
will detect chargers under ~18W and will warn users that some features may not be supported.
Using the Supplied AC Charger:
Select the appropriate international adapter depending on your requirements.
• For the USA the pins just need to be folded out from the charger.
• For other countries the pins should be folded in and the appropriate adapter slid onto the
folded pins until it clicks in.
• Then plug in one end of the supplied USB C cable to the wall charger and the other end to your
device charging port.
NOTE: The port's IP65 rating isn't maintained when the connector is inserted
DC Car Charger
The Iridium GO! exec is supplied with a DC car charger suitable for use in 2 pin cigarette lighter
sockets supplying 12-24 v often used in automobile and marine environments.
The DC charger will allow the device to fully charge in under 3 hours using the supplied USB-C
cable. Connecting other DC chargers to the USB-C charging port will also work, but if the charger
is lower power it will take longer to charge. The Iridium GO! exec will detect chargers under ~18W
and will warn users that some features may not be supported.
Using the Supplied DC Charger
Plug the DC charger into the automobile auxiliary power outlet. When the socket is powered,
•
the DC charger will show a blue light.
• Connect one end of USB-C cable to the USB-C output on the supplied charger and connect
the other end of the USB-C cable to your device charging port.
NOTE: The port's IP65 rating is not maintained when a connector is inserted.
22