Iridium GO! exec User Manual page 63

NOTE: If there is a software update available for the Iridium GO! exec, the App will generate a
pop-up notification and ask the user if they would like to update now or later.
Permissions – The App will list all permissions it requires with a brief explanation for each one.
Pressing Continue will then request the user to respond for each in turn.
On an Android or an iOS device the user may choose:
While using the app
•
• Only this time
Don't allow
•
NOTE: It is advised the user permits all requests to avoid any restrictions using the App later.
Tip Screens - Once permissions have been granted, the App will display a series of useful tips.
The user can skip these if desired by pressing the Skip button.
Preparing for connection of the Iridium GO! exec App and Iridium GO! exec.
a. Bluetooth connection
Before using your Iridium GO! exec App, you should enable Bluetooth on your smart device.
Your Iridium GO! exec App will automatically make a Bluetooth connection to the Iridium GO!
exec once the Wi-Fi connection is established. A Bluetooth connection ensures your smart
device can receive incoming calls even if the Iridium GO! exec App is in the background.
b. Connecting to the Iridium GO! exec Wi-Fi.
Before you can use the features of the Iridium GO! exec App, you will need to be connected to
the Iridium GO! exec Wi-Fi. If you have previously connected, your smart device will try to
reconnect to your Iridium GO! exec. (Make sure your Smart Device Wi-Fi is enabled and not
connected to another Wi-Fi).
Refer section Connecting to the Iridium GO! exec device.
First Welcome Screen
T&C and Permissions
63