Different Ways To Connect To The Iridium Go! Exec - Iridium GO! exec User Manual

SOS being configured for not using EIRCC and
SOS Being Configured
for IERCC as the ESP specifying a custom emergency contact number
SOS Test with a Personal Contact:
1. Make sure the device is Registered on the Iridium network.
2. Go to Settings: Device Settings: Admin settings menu on your Iridium GO! exec application.
3. Select SOS Settings.
4. Select Personal Emergency Contact, enter contact details and Save.
5. Go outside, find a clear view of the sky away from trees and buildings.
6. Press the SOS button. Your test call will be directed to your personal contact.
7. Your test call is complete! Important: If your preferred Emergency Contact is the Personal
Contact you just called, you are all set! If your preferred SOS option is IERCC, go in the Settings
and set up IERCC. To learn how to set up emergency services, read the Important Safety
Information booklet in the box. Important: The Iridium phones are pre-programmed to default to
IERCC out of the box. We strongly recommend that:
• You do not push the SOS button without registering the Iridium GO! exec device.
• You do not test without following the procedure described above.

Different Ways to Connect to the Iridium GO! exec

With Smart Device via Mobile Application
There are two options to connect your Iridium GO! exec App to the Iridium GO! exec
35