User Operating Controls; Door Status Indicators - B&D Power Drive RDO-1V4 Installation Instructions Manual

Power Drive & Roll-A-Pro

18. User Operating Controls

Button
1. OPERATE
2. CODE SET LED (Red)
3. CLOSE LIMIT LED (Red)
4. OPEN LIMIT LED (Green)
5. SERVICE LED (Yellow)
6. CODE SET and MINUS (-)

19. Door Status Indicators

Door Status Indicators
Open
Close
Opening
Closing
Door travel stopped
Door obstructed when opening
Door obstructed when closing
Opener overloaded
Mains power interrupted
®
installation instructions
Function
Opens/stops/closes the door.
Flashes when a code is being stored or when the transmitter button is pressed
Illuminates and flashes as the door closes, and remains on when the close limit
position has been reached.
Illuminates and flashes as the door opens and remains on when the open limit
position has been reached.
Indicates when the opener requires service or repairs.
Is used for storing or erasing transmitter buttons for door operation
01
05
02
OPEN LED (green)
On
Flashing
Flashing
Flashing
Alternating flashes
Rapid flashes
04
03
06
CLOSE LED (red)
On
Flashing
Flashing
Flashing
Alternating flashes
18
Beeper
Beeps while door is
moving
Beeps while door is
moving