Table of Contents
Advertisement
Power Drive & Roll-A-Pro
Contents
Installation Instructions
FOLLOW ALL INSTRUCTIONS SINCE INCORRECT INSTALLATION CAN LEAD TO SEVERE INJURY.
• before installing the drive, remove all unnecessary ropes or chains and disable any equipment, such as locks, not needed for
powered operation;
• before installing the drive, check that the door is in good mechanical condition, correctly balanced and opens and closes
properly;
• install the actuating member for the manual release at a height less than 1,8 m;
• install any fixed control at a height of at least 1,5 m and within sight of the door but away from moving parts;
• permanently fix the labels warning against entrapment in a prominent place or near any fixed controls;
• permanently fix the label concerning the manual release adjacent to its actuating member;
• after installation, ensure that the mechanism is properly adjusted and that the drive reverses when the door contacts a 40 mm
high object placed on the floor.
• necessary information for the safe handling of a drive weighing more than 20 kg. This information shall describe how to use the
handling means, such as hooks and ropes;
• the drive must not be used with a door incorporating a wicket door (unless the drive cannot be operated with the wicket door
open);
• after installation, ensure that parts of the door do not extend over public footpaths or roads.
• vertical doors and gates need an anti-drop feature or device;
• information if a hazardous part of the drive is intended to be installed at a height of at least 2.5 m above floor level or other
access level;
• except for horizontally moving pedestrian doors, ensure that entrapment due to the opening movement
of the driven part is avoided
®
installation instructions
3
4
5
5
6
7
7
8
8
9
10
10
11
11
11
12
12
12
12
12
12
12
13
13
13
13
13
13
Home Owner Instructions
2
14
14
14
14
14
14
15
15
15
15
16
16
17
17
17
17
17
17
18
18
19
20
22
22
23
23
23
Hide quick links:
Advertisement
Table of Contents
