User Operating Controls; Door Status Indicators - B&D SDO-3V2 Controll-A-Door S Instruction Manual

16 Controll-A-Door S & PanelPro Instruction Manual
®

18. User Operating Controls

Button
1. OPERATE
2. CODING LED (Red)
3. DOOR CODE (Blue)
4. DOOR STATUS LED (Yellow)
5. OPEN LED (Green)
6. CLOSE LED (Red)
7. SET (Orange)

19. Door Status Indicators

Door Status Indicators
Open
Close
Opening
Closing
Door travel stopped
Door obstructed when opening
Door obstructed when closing
Opener overloaded
Mains power interrupted
Function
Opens/stops/closes the door
Flashes when a code is being stored or when the transmitter button is pressed
Is used for storing or erasing transmitter buttons for door operation
Illuminates when Service is due.
Illuminates and flashes as the door opens and remains on when the open limit
position has been reached.
Illuminates and flashes as the door opens closes, and remains on when the close
limit position has been reached.
Is used during installation. The SET button is also used to program the PET (Pedestrian)
position and to re-initialise the opener.
03
02
04
OPEN LED (green)
On
Flashing
Flashing
Flashing
Alternating flashes
Rapid flashes
01
07
05
CLOSE LED (red)
On
Flashing
Flashing
Flashing
Alternating flashes
06
Beeper
Beeps while door is moving
Beeps while door is moving