Breather Tube Heater And Oil Heater Kit - Kohler 14RCA Instructions Manual

Power cord
Figure 6 Battery Heater (typical)
1.8.3

Breather Tube Heater and Oil Heater Kit

The breather tube heater and oil heater kit is recommended for improved cold starting in locations where the ambient temperat ure
drops below 0°C (32°F).
Note:
The heaters require a continuous source of AC power. See Figure 7 and Figure 8 for the power supply voltage required.
Note:
The breather tube heater and oil heater must be used together.
Verify that AC power is connected to the generator set as described in the generator set Installation Manual. The circuit mus t be
backed up by the generator set to provide power at all times. Refer to TT-1709 for instructions to install the heaters and connect
120VAC power.
See Figure 9 and Figure 10 for illustrations of the 120VAC breather tube heater and oil heater.
Heater Part Number
Voltage
Thermostat ON
Thermostat OFF
Figure 7 Breather Tube Heater Specifications
Heater Part Number
Voltage
Thermostat ON
Thermostat OFF
Figure 8 Oil Heater Specifications
Heating element
Figure 9 Breather Tube Heater
TP-7092 11/22
GM110893, GM110894
120 VAC
4°C (40°F)
13°C (55°F)
GM110895, GM110896
120 VAC
4°C (40°F)
13°C (55°F)
Thermostat
120 VAC female connector
(connect to oil heater)
Label
Battery heater wrap
Retaining strap or cable ties
(included)
120 VAC plug
21