Breather Tube And Oil Heater - Kohler 14RCAL Installation Manual

5.7.2

Breather Tube and Oil Heater

The breather tube heater and oil heater kit is recommended for improved cold starting in locations where the ambient temperature
drops below 0°C (32°F).
Note:
The heaters require a continuous source of AC power. See Figure 49 and Figure 50 for the power supply voltage required.
Note:
The breather tube heater and oil heater must be used together.
Verify that AC power is connected to the generator set as described in the generator set Installation Manual. The circuit mus t be
backed up by the generator set to provide power at all times. Refer to TT- 1709 for instructions to install the heaters and connect
120VAC power.
See Figure 51 and Figure 52 for illustrations of the 120VAC breather tube heater and oil heater.
Heater Part Number
Voltage
Thermostat ON
Thermostat OFF
Figure 49 Breather Tube Heater Specifications
Heater Part Number
Voltage
Thermostat ON
Thermostat OFF
Figure 50 Oil Heater Specifications
Heating element
Figure 51 Breather Tube Heater
Heating element
Figure 52 Oil Heater
56
GM110893, GM110894
120 VAC
4°C (40°F)
13°C (55°F)
GM110895, GM110896
120 VAC
4°C (40°F)
13°C (55°F)
Thermostat
Heating probe
120 VAC female connector
(connect to oil heater)
Label
Thermostat
120 VAC male connector (connect to breather tube heater)
120 VAC plug
GM107705
Label
GM101483
TP-7091 11/22