Genset System Menu - Kohler 14RCA Instructions Manual

3.14 Genset System Menu

The genset system menu displays the system information shown in Figure 42. Generator sets are factory-set and should not
require changes to the system settings in the field.
A Kohler-authorized dealer can adjust these settings, if necessary. If the generator set is reconnected to a different voltage or
the system settings require adjustment for some other reason, see the Changing Settings section for instructions to enable
editing and change the system settings.
Note:
Use caution when navigating the controller menus. In some menus, pressing the Select button can enable editing of the controller
settings. Changing the settings to incorrect values can adversely affect generator set operation or render the unit inoperabl e.
Voltage Regulator (VR) Voltage Adj
The generator set voltage is factory set and typically does not require adjustment in the field. If voltage adjustment is required,
contact a Kohler authorized dealer for service. Refer to the generator set Installation Manual for instructions to adjust the voltage.
Fuel Type
The fuel type, LP or natural gas, is shown. Do not change the fuel type in this menu unless the generator's fuel system has b een
converted by an authorized dealer.
Setting the Exerciser
Use the Genset System menus to set the generator set exerciser. Refer to the Exercise section for instructions to set the
exerciser and for more information about exercising the generator set.
After a scheduled exercise run, the Next Exercise time and date will be updated automatically based on the Exercise Frequency
setting.
Language
Controllers can be set for the following languages: English, French, Spanish, Dutch, or German.
Adjusting the Display Contrast
To adjust the display contrast, use the down arrow button to step to the Contrast menu. Press the Select butto n, and then use
the up and down arrow buttons to adjust the contrast. Press the Select button to save the contrast setting.
52 TP-7092 11/22