Date And Time Menu; Networking Information Menus - Kohler 14RCA Instructions Manual

3.17 Date and Time Menu

The date and time will typically be set at controller powerup. To change the date, time, or time format (12 hour or 24 hour), use
the Date and Time menu. See Figure 45.
To change the date and time, press the Select button. See the Changing Settings section for instructions.
Figure 45 Date and Time Menu

3.18 Networking Information Menus

Use the networking menus to view and adjust communication settings for systems with remote RBUS devices such as a PIM or
load shed kit, and for systems that use the Kohler
RBUS is a proprietary RS-485 communications protocol.
The Networking Information menu leads to submenus for network and RBUS communication settings. See Figure 46.
Networking --->
Information
Figure 46 Networking Information Menu
56
Date and Time
® ®
OnCue Plus Generator Management System.
Networking --->
Status
Networking --->
Configuration
RBUS --->
Information
<--- Return
Date:
02Dec2011
Time:
12:34pm
Time Format:
12hr
<--- Return
See the Network Status Submenu
NS
section
See the Network Configuration
NC
Submenu section
See the RBUS Information section
RB
TP-6810
TP-7092 11/22