3.19 Programmable Interface Module (PIM) Status Menu
The PIM status menu displays the status of inputs and outputs connected to the programmable interface module (PIM). This
menu appears only if a PIM is connected. This is a status display menu only. Input and output settings cannot be changed from
the RDC2 controller's user interface.
A personal computer running Kohler
authorized dealer for service.
®
®
The Kohler
OnCue
Plus Management System can be used to turn outputs on and off. See the OnCue
Operation Manual for instructions.
PIM
Status:
Figure 51
Programmable Interface Module (PIM) Status Menu
62
SiteTech™ software is required to change the input and output settings. Contact an
®
PIM 1 --->
<--- Return
Input 1
In/Active
Input 2
In/Active
Output 1:
In/Active
Output 2:
In/Active
Output 3:
In/Active
Output 4:
In/Active
Output 5:
In/Active
Output 6:
In/Active
<--- Return
®
Plus Software
tp6810
TP-7092
11/22