3.18.1 Networking Status Submenu
The Networking Status submenu contains settings for OnCue
If DHCP is enabled, IP parameters are not displayed. If DHCP is disabled (i.e., if a static IP address is used), the IP parameters
are displayed.
To enable or disable DHCP and change the IP settings, go to the Networking Configuration menu.
Networking- -->
Information
Figure 47
Network Status Submenu
TP-7092
11/22
®
Plus. Changes to these settings are not typically required.
Networking- -->
Status
OnCue Status:
Connected
DHCP:
Enabled
IP Address:
123.456.789.123
Subnet Mask:
123.456.789.123
Gateway:
123.456.789.123
DNS 1:
123.456.789.123
DNS 2:
123.456.789.123
Ethernet Status:
Disconnected
OnCue Server:
123.456.789.123
<--- Return
57