Development Environment; System Requirements; Development Toolchains; Demonstration Software - ST STM32 User Manual

UM1974
3

Development environment

3.1

System requirements

•
Multi-OS support: Windows
• USB Type-A or USB Type-C
3.2

Development toolchains

•
IAR Systems
•
Keil
•
STMicroelectronics - STM32CubeIDE
3.3

Demonstration software

The demonstration software, included in the STM32Cube MCU Package corresponding to
the on-board microcontroller, is preloaded in the STM32 flash memory for easy
demonstration of the device peripherals in standalone mode. The latest versions of the
demonstration source code and associated documentation can be downloaded from
www.st.com.
4

Conventions

Table 3 provides the conventions used for the ON and OFF settings in the present
document.
Convention
Jumper JPx ON
Jumper JPx OFF
Solder bridge SBx ON
Solder bridge SBx OFF
In this document the references for all information that is common to all sale types, are
"STM32 Nucleo-144 board" and "STM32 Nucleo-144 boards".
a. Windows is a trademark of the Microsoft group of companies.
®
b. Linux
c. macOS
d. On Windows
®
- IAR Embedded Workbench
® (d)
- MDK-ARM

Table 3. ON/OFF conventions

is a registered trademark of Linus Torvalds.
®
is a trademark of Apple Inc. registered in the U.S. and other countries and regions.
®
only.
®(a) ®(b)
10, Linux 64-bit, or macOS
®
to Micro-B cable
®(d)
Jumper not fitted
SBx connections closed by solder or 0 ohm resistor
SBx connections left open
UM1974 Rev 9
Development environment
® (c)
Definition
Jumper fitted
9/85
84