Preparing A Shared Network Folder - Epson WF-C5890 Series User Manual

Preparing the Printer and Making Initial Settings
Messages
Sender's Email Address is incorrect.
Change to the email address for your
email service.
Cannot access the printer until
processing is complete.

Preparing a Shared Network Folder

Setting a Shared Network Folder
Set a shared network folder to save a file from the printer.
When saving a file to the folder, the printer logs on as the user of the computer on which the folder was created.
Also, make sure you setup MS Network when creating the shared network folder.
Creating the Shared Folder
Before Creating the Shared Folder
Before creating the shared folder, check the following.
❏ The printer is connected to the network where it can access the computer where the shared folder will be
created.
❏ A multi-byte character is not included in the name of the computer where the shared folder will be created.
Important:
c
When a multi-byte character is included in the computer name, saving the file to the shared folder may fail.
In that case, change to the computer that does not include the Multi-byte character in the name or change the
computer name.
When changing the computer name, make sure to confirm with the administrator in advance because it may affect
some settings, such as computer management, resource access, etc.
Checking the Network Profile
On the computer where the shared folder will be created, check whether folder sharing is available.
1. Log in to the computer where the shared folder will be created by the administrator authority user account.
2. Select Control Panel > Network and Internet > Network and Sharing Center.
3. Click Change advanced sharing settings, and then click
displayed network profiles.
This message appears when the specified sender's Email address is wrong.
This message appears when the printer is busy.
70
>
Preparing and Setting Up the Printer Accordin
Cause
for the profile with (current profile) in the
...