Epson WF-C5890 Series User Manual page 427
Hide thumbs
Also See for WF-C5890 Series:
- Start here (4 pages) ,
- User manual (438 pages) ,
- Start here (4 pages)
Table of Contents
Advertisement
Administrator Information
Items
IPv6 Setting
IPv6 Privacy Extension
IPv6 DHCP Server Setting
IPv6 Address
IPv6 Address Default Gateway
IPv6 Link-Local Address
IPv6 Stateful Address
IPv6 Stateless Address 1
IPv6 Stateless Address 2
IPv6 Stateless Address 3
IPv6 Primary DNS Server
IPv6 Secondary DNS Server
IEEE802.11k/v
IEEE802.11r
>
>
Managing the Printer
Setting value and Description
You can specify whether or not to enable IPv6 Setting.
You can specify whether or not to enable IPv6 Privacy Extension.
You can specify whether or not to enable IPv6 DHCP Server Setting.
When using IPv6 Address, enter in the following format.
❏ xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx / prefix
❏ xxxx is a hexadecimal number from 1 to 4 digits, and the prefix is a decimal
number from 1 to 128.
❏ If there are consecutive blocks where xxxx is all 0s, it can be omitted as ::.
(Only one place).
When assigning IPv6 Address Default Gateway, enter in the following format.
Enter in the following format.
❏ xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx
❏ xxxx is a hexadecimal number from 1 to 4 digits.
❏ If there are consecutive blocks where xxxx is all 0s, it can be omitted as ::.
(Only one place).
Displays the valid IPv6 Link-Local Address.
Displays the valid IPv6 Stateful Address.
Displays the valid IPv6 Stateless Address 1.
Displays the valid IPv6 Stateless Address 2.
Displays the valid IPv6 Stateless Address 3.
Enter the IPv6 primary DNS server in the following format.
❏ xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx
❏ xxxx is a hexadecimal number from 1 to 4 digits.
❏ If there are consecutive blocks where xxxx is all 0s, it can be omitted as ::.
(Only one place).
When assigning IPv6 Secondary DNS Server, enter in the following format.
❏ xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx: xxxx
❏ xxxx is a hexadecimal number from 1 to 4 digits.
❏ If there are consecutive blocks where xxxx is all 0s, it can be omitted as ::.
(Only one place).
You can specify whether or not to enable IEEE802.11k/v.
For models that support Wi-Fi, this item is displayed when the Wireless LAN
Interface is installed.
You can specify whether or not to enable IEEE802.11r.
For models that support Wi-Fi, this item is displayed when the Wireless LAN
Interface is installed.
427
Managing the Network Connection
Advertisement
Table of Contents
Troubleshooting
